Ronseal One Coat Stain Block - White 750ml 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Klober Regent Tile Vent KG6084, Dark Brown 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Code 6 Cast Lead - 390mm x 6m 
OX Pro Chalk Refill, Red - 226g 
Ronseal Super Flexible Smooth Finish Filler - 330g 
Everbuild 408 Super Seal - 5 Litre 
Ulti-Mate Bold Roll Brown Tile Vent 
OX Trade Plastering Trowel - 11 inch / 280mm 
ALM Code 4 Milled Lead - 390mm x 6m 
Over Fascia Vent, 10mm 
Everbuild PVCu Acti-Spray – Clear 200ml 
Soudal Silirub 2, White - 300ml 
Bond It Mould Stop - Clear 5L 
Bond It Trowel Mastic - Black 2.5L 
Ronseal Interior Varnish - Clear Satin 2.5L 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Soudal solseal is a solvent free adhesive specially formulated for bonding mirrors and difficult materials such as metals, plasterboard, timber, fibreglass and to most other common surfaces and will even bond to damp surfaces
Used for the Internal fixing of mirrors, coated glass and glass splashback's
Important always apply in vertical lines to avoid the build up of moisture across the joint the moisture buildup would possibly damage the mirror backing over time.
Before bonding the back coating of the mirror should be checked for damages eg scratches. Do not apply adhesive to a damaged mirror.
Apply product with the enclosed triangular nozzle in vertical beads to the back of the mirror.
Depending on the dimension and weight of the mirrors, beads should be placed at equal distances between 10 to 20cm from each other.
Use a double sided mirror tape for an initial tack and to create the necessary ventilation behind the mirror.
Do not seal the mirror edges until the mirror adhesive is fully bonded, mirror adhesive is moisture cured from the air.
