Bond It The Beast PU Adhesive - Brown 500ml 
Ronseal Anti-Condensation Paint - White 2.5L 
Bond It PVA & Adhesive Sealer - White 5L 
OX Pro Impact Bit Set - 11 Piece 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Easy-Trim Over Fascia Vent - 10mm x 1m 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Everbuild Roof & Gutter Sealant - Black 295ml (Box of 12) 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Armatool Batten Gauge - Up to 14" 
Soudal Soudabond 265 Classic Spray - 500ml 
Bond It PVA & Adhesive Sealer - White 2.5kg 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
ALM Code 4 Milled Lead - 510mm x 3m 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
ALM Code 8 Milled Lead - 360mm x 6m 
Timco 6pcs Stubby Screwdriver Assorted Set 
Timco Blue Polypropylene Rope 8mm x 15m 
Armatool Slate Guillotone 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Brown (Box of 5) 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
Thompson's One Coat Damp Seal - White 250ml 
Uses
One Coat Waterseal by Thompson's offers excellent benefits for your brickwork, concrete or stone surface. It has a unique formula created from water-based, alkyl polysiloxane resin, delivering optimal substrate penetration. After application, water cannot damage the surface, and the resin combats the water, preventing it from seeping in and causing damage. The substrates you can apply this product include;
- Stone
- Concrete
- Brick
Preparation
Prepare the surface by brushing it with a stiff bristle brush, and any crack must be filled. Also, complete any pointing repairs required.
Application
- Give the tin a thorough shake.
- Apply using a brush or roller.
- Apply directly to the surface, and work from the bottom upwards if it is a vertical wall. Ensure you work in 1-metre sections to cover the area entirely.
- Ensure you coat the full area, mortar lines, and isolated areas, not just the walls.
Limitations
- Do not apply this product if the temperature in the air and surface is below 10°C
- This product is unsuitable to apply if it is raining or rain is imminent during the drying process.
- Do not use over masonry paint or on pre-painted surfaces.
- Some substrates may darken when treated.
- Do not use detergent to clean the surface that is being treated.
- This product should not be applied onto asphalt, synthetic fibres, plastics, natural rubber or wood.
- Ensure the application area is well-ventilated and prevent the product from frost.
- This product is only suitable for external use. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
