Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
ALM Code 6 Milled Lead Flashing - 240mm x 6m 
ALM Code 3 Milled Lead - 240mm x 6m 
Everbuild 501 PVA - 1 Litre 
Code 5 Cast Lead - 390mm x 3m 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Code 6 Cast Lead - 210mm x 3m 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Timco Lithium EP2 Grease - 400g 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Ronseal One Coat Stain Block - White 750ml 
ALM Code 7 Milled Lead - 1000mm x 3m 
Code 3 Cast Lead - 914mm x 3m 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Ronseal Crystal Clear Outdoor Varnish - Matt 750ml 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Timloc Universal Slate Roof Vent Adaptor Only 
The Eaves Vent Roll Out Rafter Tray by Timloc is an outstanding product that enables ventilation to your roofing system, combating condensation and aiding the structural integrity of the building. It has been quality tested against various regulations and standards, and it has passed the following;
- All NHBC Requirements
- BS EN ISO 9001
- BS EN ISO 14001
- All Building Standards
- All relevant Building Regulations
Installation
Unroll the ventilator along the rafters, and this should be along the entire length of the eaves on both sides of the building, creating a cross-flow ventilation action.
Position centrally above the wall plates because it's the narrowest part of the roof and is most likely to constrict the airflow of the roof insulation.
Push the corrugations down over the top of the rafters and secure them using clout nails or staples.
