Everbuild Coving Adhesive & Joint Filler - White 290ml (Box of 12) 
Timco Nut Mix Grab Pack - 980 Pieces 
Everflex Premium+ 450 Builders Silicone – Brown 300ml (Box of 25) 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Thompson's One Coat Waterseal - 1L 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Everbuild P14 System Inhibitor – 1 Litre 
Evo-Stik Impact Adhesive - 500ml 
Code 6 Cast Lead - 450mm x 6m 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Everbuild Opti-Mix Cement Colourant – Black 1 Litre 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 3m 
Klober Uni Angle Ridge End Cap, Black 
The Eaves Vent Roll Out Rafter Tray by Timloc is an outstanding product that enables ventilation to your roofing system, combating condensation and aiding the structural integrity of the building. It has been quality tested against various regulations and standards, and it has passed the following;
- All NHBC Requirements
- BS EN ISO 9001
- BS EN ISO 14001
- All Building Standards
- All relevant Building Regulations
Installation
Unroll the ventilator along the rafters, and this should be along the entire length of the eaves on both sides of the building, creating a cross-flow ventilation action.
Position centrally above the wall plates because it's the narrowest part of the roof and is most likely to constrict the airflow of the roof insulation.
Push the corrugations down over the top of the rafters and secure them using clout nails or staples.
