Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Code 6 Cast Lead - 180mm x 3m 
ALM Code 3 Milled Lead - 850mm x 6m 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
Bond It Bitumen Paint - Black 25L 
Bond It AS900 Acoustic Sealant - White 900ml 
Sika MaxMix Waterproofer - 1 Litre 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Thompson's One Coat Damp Seal - White 2.5L 
Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
FloPlast Black Half Round Adjustable Angle - 50° to 156° 
Lead Hall Fixing Clips - Pack of 50 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Thompson's Emergency Roof Seal - Black 2.5L Dry Fix Accessories
Best Sellers
-
FloPlast Half Round Running Outlet, Brown
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Soudal Sealant Remover – 400ml (Box of 12)
£84.96 Incl VAT £70.80 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 300mm x 6m
£152.93 Incl VAT £127.44 Excl VAT Add to basket -
Code 3 Cast Lead – 1600mm x 3m
£205.63 Incl VAT £171.36 Excl VAT Add to basket -
Soudal Butyrub Non-Setting Mastic – Grey 300ml (Box of 12)
£36.00 Incl VAT £30.00 Excl VAT Add to basket -
Ronseal Stays White One Coat Non-Drip Paint – Gloss 750ml
£13.99 Incl VAT £11.66 Excl VAT Add to basket
Dry Fix Accessories
While it is common to sometimes mortar in the ends of the roof verge even in a structure that is otherwise dry fix, for roofers looking for a totally dry tiling arrangement the Easy Trim End Cap and Starter Unit are vital. These are both made of a polypropylene polymer that is highly resistant to heat, weather, and UV rays. In addition, both are totally watertight, protecting the vulnerable underbelly of the verge tiles from the weather and also any wayward wildlife.
Why should I use an End Cap and Starter Unit?
The End Cap and Starter Unit are important because they serve to seal off each end of a set of verge tiles without any need for mortaring. The less a roof relies on mortaring, the more resistant to the weather it is and the more it can flex to absorb damage.
The Starter Unit is mounted where the verge meets the eaves of the roof. The End Cap on the other hand is mounted where the verge meets the ridge at the top of the roof. Both are critical to implementing a full dry fix roof.
