Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Soudal Soudabond 265 Classic Spray - 500ml 
Timloc Telescopic Underfloor Vent 5-7 Courses 
Right Hand Klober Contract Dry Verge Unit Grey 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
Klober Profile-Line Flat Tile Vent - Slate Grey KG9856-3-0429 (Box of 10) 
Ronseal Precision Finish Brush - 2.5 Inch 
Everbuild Triple Action Wood Treatment – 1 Litre 
FloPlast Square Line Offset Bend 112.5° Black – 65mm 
ALM Code 7 Milled Lead - 180mm x 6m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Easy-Trim Ridge F Universal Dry Ridge System - 10m Kit 
Ronseal Crystal Clear Outdoor Varnish - Satin 250ml 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
OX Pro Super Open Mouth Tool Bag 
SOUDAL Fix ALL X-treme Power & Tack Sealant Adhesive Express WHITE - 280ml 
Timloc Castellated Tile Vent Red (Box of 8) 
Bond It AS900 Acoustic Sealant White 900ml - Box of 12 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
ALM Code 4 Milled Lead - 1200mm x 6m 
Permavent Easy Slate 500 - Box of 100 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml Roof Felt Adhesives
Best Sellers
-
Everbuild Tecnic Silicone 825 – White 380ml (Box of 25)
£135.75 Incl VAT £113.13 Excl VAT Read more -
Everbuild Gator Glue Adhesive – 150ml
£8.99 Incl VAT £7.49 Excl VAT Read more -
Ronseal Hairline Crack Ready Mix Wall Filler – White 330g
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Code 7 Cast Lead – 300mm x 6m
£182.78 Incl VAT £152.32 Excl VAT Add to basket -
Code 4 Cast Lead – 150mm x 6m
£51.41 Incl VAT £42.84 Excl VAT Add to basket -
ALUKAP-XR Gable Bar, White or Brown
From: £118.46 Incl VAT £98.72 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
