Code 6 Cast Lead - 1000mm x 3m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Thompson's Emergency Roof Seal - Black 2.5L 
ALM Code 3 Milled Lead - 210mm x 3m 
Everbuild Dual Purpose Foam Cleaner – 500ml (Box of 12) 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
OB41 Multi-Use Penetrating Oil Spray - 400ml 
FloPlast Half Round To Cast Iron Half Round Gutter Adaptor - Black 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Everbuild Lead Mate Patination Oil – 1 Litre 
Bond It Contractors PVA - 5L White 
Stanley Hi-Viz Tylon 5m/Ex19mm Tape 
Cromar Bitumen Trowel Mastic - Black 2.5L 
FloPlast Square Line Downpipe Offset Bend 92.5° White – 65mm 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Ronseal One Coat Stain Block - White 750ml 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Bond It PVA & Adhesive Sealer - White 5L 
Roughneck® V-Series Axe - 20oz/0.6kg 
Timco Professional Wire Strippers 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Cromar Black Bitumen Paint – 2.5 Litre 
Everbuild Silicone Spray - 400ml Roof Felt Adhesives
Best Sellers
-
Bond It 5 Minute PU Wood Gel – Translucent 300ml
£5.98 Incl VAT £4.98 Excl VAT Add to basket -
Colron Refined Teak Oil – 500ml
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
Timloc Mini Castellated Tile Vent
From: £24.99 Incl VAT £20.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Mould Stop – Clear 1L
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Easy-Trim Lead R Flashing Textured – 450mm x 5m
£59.65 Incl VAT £49.71 Excl VAT Add to basket -
Timloc Ambi-Verge Eaves Starter
From: £5.99 Incl VAT £4.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
