ALM Code 3 Milled Lead - 760mm x 6m 
Timloc Double Pantile Tile Vent Red (Box of 6) 
ALM Code 5 Milled Lead - 1000mm x 6m 
Everbuild Multi-Stick - White 350ml (Box of 12) 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Code 5 Cast Lead - 1000mm x 6m 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Satin 500ml 
ALM Code 7 Milled Lead - 450mm x 3m 
Code 8 Cast Lead - 150mm x 6m 
OX Spectrum Trade XL 3 Core & Accessories Set 
Cromar Cold Gritting Solution - Black 25 Litres 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Permavent Easy Slate 600 - Pack of 20 
ALM Code 4 Milled Lead - 800mm x 3m 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Ronseal Precision Finish Brush - 3 Pack 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
Restec GRPROOF 1010 Base Coat Resin - 20kg 
Left Hand Klober Contract Dry Verge Unit Brown 
Freeflow 114mm Round Gutter Drain Pipe Hopper - White 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
ALM Code 6 Milled Lead Flashing - 240mm x 3m 
Cromar Bitumen Primer – Black 5 Litre 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
Everbuild ASBO Graffiti Remover - 400ml 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
OX Pro Aluminium Hawk - 13 inch x 13 inch 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml (Box of 25) 
FloPlast Square 112° Offset Downpipe - White 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Resiblock Indian Sandstone Sealer Invisible - 5 Litre Roof Felt Adhesives
Best Sellers
-
EVO-STIK Sticks Like All Weather Adhesive – Clear 290ml
£7.39 Incl VAT £6.16 Excl VAT Add to basket -
Soudal Degrip All Spray – 300ml
£12.29 Incl VAT £10.24 Excl VAT Add to basket -
Hambleside Danelaw Double Roman Tile Vent TV15/3 – Antique Red (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
TIMCO Precision Screwdriver Bit Set -18 Pieces
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Bora Workhorse Single Piece Stand with Folding Legs PM-3350
£46.99 Incl VAT £39.16 Excl VAT Add to basket -
Bond It WP100 Premium Neutral Cure Oxime Silicone Sealant – EU3
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
