Code 8 Cast Lead - 800mm x 3m 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
FloPlast Round 92½° Bend - Brown 
Ronseal Ultimate Finish Decking Pad Kit 
ALM Code 8 Milled Lead - 390mm x 3m 
Copper Coil 20m x 50mm 
Bond It Felt Adhesive - Black 2.5L 
Klober Uni Angle Ridge End Cap, Black 
ALM Code 7 Milled Lead - 510mm x 3m 
Code 6 Cast Lead - 210mm x 3m 
Armatool Mop Heads Size 12 
Timco High Visibility Wet Paint Tape 
Klober Permo Ultra 120 - 1m x 50m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
Soudal Fix ALL Turbo - Grey 290ml 
ALM Code 4 Milled Lead - 240mm x 3m 
Code 7 Cast Lead - 360mm x 6m 
Everbuild All Purpose Ready Mixed Filler - 1kg 
OX Tools Trade Heavy Duty Chalk Line Reel 30m / 100ft 
Everbuild Caulk Once – White 295ml (Box of 12) 
Timloc Non-Profile Tile Vent Red (Box of 8) 
FloPlast Square to Round Downpipe Adaptor - Black 
Thompson's One Coat Waterseal - 2.5L 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
OX Pro Mini Round Point Shovel 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml Roof Felt Adhesives
Best Sellers
-
Code 3 Cast Lead – 760mm x 6m
£194.21 Incl VAT £161.84 Excl VAT Add to basket -
Irwin T20 Torx Screwdriver Bits – (Quantity 10)
£9.99 Incl VAT £8.33 Excl VAT Read more -
Ronseal’s EGC Hardener BPO – 30g
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Sealotone Liquid Cement – 1 Litre
From: £8.99 Incl VAT £7.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Evo-Stik Liquid Nails Solvent Free – Buff 290ml
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Soudal Soudalead PB Lead Sealant – Grey 300ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
