80 x Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
ALM Code 5 Milled Lead - 850mm x 6m 
Cromar All Weather Roof Coat - Black 5 Litre 
Timloc Interlocking Plain Tile Vent Red (Box of 12) 
Everbuild Seal Rite Strip Out Tool 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Everbuild Black Jack 908 DPM – 25 Litre 
Everbuild Anchorset Green 300 - Grey 300ml 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Code 4 Cast Lead - 800mm x 6m 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Everbuild PVC Hazard Tape - Red/White (50mm x 33m) 
Everbuild Exact Gap Foam - 750ml (Box of 12) 
Easy-Trim Universal Dry Verge Unit - Black 
Evo-Stik 528 Instant Contact Adhesive – 1 Litre 
Timco Screwdriver 6-Tool Set 
Timloc Plain & Interlocking Tile Vent Adapter 
ALM Code 8 Milled Lead - 300mm x 3m 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Charcoal 10m x 1m 
Timco Anti-Slip Tape 
Everbuild Forever Clear Silicone Sealant – 295ml 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Terracotta (Box of 5) 
Timloc Single Pantile Tile Vent Grey (Box of 11) 
OX Pro Dry Wall Hammer - 14 oz 
ALM Code 3 Milled Lead - 210mm x 6m Flashing Tape
Best Sellers
-
Bostik Bituminous Multi-Purpose Waterproofing Black Paint
From: £9.99 Incl VAT £8.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timco Pozi Double Countersunk Decking Screw – Various Sizes
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Tecnic Silicone 825 – Buff 380ml (Box of 25)
£139.75 Incl VAT £116.46 Excl VAT Read more -
Code 6 Cast Lead – 1600mm x 3m
£411.26 Incl VAT £342.72 Excl VAT Add to basket -
Easy-Trim End Cap – Angled
From: £4.99 Incl VAT £4.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Ulti-Mate Cambrian Grey Tile Vent
£59.99 Incl VAT £49.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
