Siroflex Painters Caulk-It - 380ml 
Evo-Stik Seriously Strong Stuff Fast Setting Adhesive, White - 290ml 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Everbuild Anchorset Green 150 - Grey 150ml 
Timloc Over Fascia Vent - 1m 
Everbuild Wood Filler Hardener / Catalyst - 40g 
SOUDAL Fix ALL X-treme Power & Tack Sealant Adhesive Express WHITE - 280ml 
OX Trade Hard Green Carpenters Pencils – Pack of 10 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Thompson's One Coat Waterseal - 1L 
ALM Code 3 Milled Lead - 240mm x 6m 
OX Pro Magnetic Level 600mm 
Bond It All Weather Roofing Compound - Black 5L 
ALM Code 8 Milled Lead - 850mm x 6m 
Everbuild Febond PVA - 1L 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Everbuild Triple Action Wood Treatment – 5 Litre 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 330g 
Everbuild Silicone Spray - 400ml 
Soudal Gun & Foam Cleaner Gun Grade - 500ml (Box of 12) 
Everbuild Lumberjack® Woodworm Killer - Clear 5L 
Code 4 Cast Lead - 390mm x 3m 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 290ml 
Ronseal Precision Finish Brush - 2 Inch 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Code 3 Cast Lead - 180mm x 6m 
Bond It Contractors Grade PVA - White 500ml 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Klober Uni Angle Ridge End Cap, Black 
Code 5 Cast Lead - 390mm x 3m 
ALM Code 4 Milled Lead - 1000mm x 6m 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
FloPlast Half Round Downpipe Socket, Black 
Spax Magnetic Bit Holder - 1 Piece 
Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre 
Bond It Mould Stop - Clear 5L 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Everbuild Dual Purpose Foam Cleaner – 500ml 
FloPlast Square Fascia Bracket White – 114mm Flashing Tape
Best Sellers
-
Everbuild Quick Drying Clear Varnish – Matt 250ml
£9.99 Incl VAT £8.33 Excl VAT Read more -
ALM Code 6 Milled Lead Flashing – 914mm x 6m
£467.28 Incl VAT £389.40 Excl VAT Add to basket -
Timco Folding Utility Knife
£12.99 Incl VAT £10.83 Excl VAT Read more -
Soudal Green Fix Adhesive, Grass Green – 290ml
£13.99 Incl VAT £11.66 Excl VAT Read more -
Code 7 Cast Lead – 850mm x 3m
£259.90 Incl VAT £216.58 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 450mm x 3m
£135.94 Incl VAT £113.28 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
