Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Code 3 Cast Lead - 800mm x 3m 
ALM Code 6 Milled Lead Flashing - 360mm x 6m 
Code 6 Cast Lead - 240mm x 6m 
Bond It Aluminium Solar Reflective Paint - Silver 5L 
ALM Code 5 Milled Lead - 510mm x 3m 
ALM Code 7 Milled Lead - 1600mm x 3m 
Bond It Multi-Purpose Powder Filler - White 1.5Kg 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Timco 4" Press Lock, Black 
Ronseal One Coat Water-Based Tile Paint - Granite Grey Satin 750ml 
Colron Refined Finishing Wax - 325g 
Everbuild XT44 Maintenance Spray - 400ml 
DeWalt XR Combi Drill & Impact Driver Twin Pack 
BORA - PM-4500 Speedhorse 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Everbuild Black Jack 907 Solar Reflective Paint – 5 Litre 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Ronseal Interior Varnish - Clear Satin 2.5L 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Siroflex Trade High Viscosity Superglue - 20g 
OX Tools Pro PolyZip 4 Piece Cutter Set - (15, 22, 35, 42mm) Flashing Tape
Best Sellers
-
Soudal Fix ALL Flexi – White 290ml (Box of 12)
£57.49 Incl VAT £47.91 Excl VAT Add to basket -
Code 4 Cast Lead – 1600mm x 3m
£279.89 Incl VAT £233.24 Excl VAT Add to basket -
Timco Grouting Float
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Everbuild Showerproof Bathroom Silicone – Clear 280ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Klober Permo Ecovent – 1.1m x 50m
£70.19 Incl VAT £58.49 Excl VAT Add to basket -
Manthorpe G1105 Flash Vent – 3m Roll
£54.95 Incl VAT £45.79 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
