OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
FrogTape® Multi-Surface Masking Tape - Green 24mm x 41.1m 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
Gorilla Tape - Black (48mm x 32m) 
Ronseal One Coat Water-Based Tile Paint - Black Gloss 750ml 
Soudal Soudalead PB Lead Sealant - Grey 300ml Flashing Tape
Best Sellers
-
Axgard 8mm Solid Polycarbonate Sheet, Clear
From: £40.66 Incl VAT £33.88 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 7 Milled Lead – 150mm x 3m
£45.31 Incl VAT £37.76 Excl VAT Add to basket -
ALUKAP-XR Ridge Radius End Cap, RAL Powder Coat
£211.38 Incl VAT £176.15 Excl VAT Add to basket -
Timco Solo Woodscrew Mixed Tray
£19.99 Incl VAT £16.66 Excl VAT Read more -
Tyvek Single Sided Tape 75mm x 25m
£35.63 Incl VAT £29.69 Excl VAT Read more -
OX Pro Semi Flex Plastic Trowel
From: £41.05 Incl VAT £34.21 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
