Cast Lead Dome Set (Lead Dots) - Pack of 20 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Everbuild No Waste Foam – 750ml 
Everbuild General Purpose Silicone - Brown 290ml (Box of 12) 
Ronseal Wet Rot Wood Hardener - 250ml 
ALM Code 3 Milled Lead - 240mm x 3m 
Code 7 Cast Lead - 1600mm x 6m 
Timloc Double Roman Tile Vent Brown (Box of 6) 
Cromar Acrypol+ Plus Roof Coating Waterproof System - Grey 2.5kg 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Bond It The Beast PU Adhesive - Brown 150ml 
Ronseal Anti-Condensation Paint - White 2.5L 
Timco Screwdriver 6-Tool Set 
FloPlast Round 92½° Bend - Black 
Ulti-Mate Cambrian Grey Tile Vent 
Bond It Oil Stain Remover - White 1L 
Everbuild Overlap & Border Adhesive - White 250g 
Code 8 Cast Lead - 1200mm x 6m 
Spax Pozi Pz2 Drill Bits - 25mm (Pack of 5) 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Brown - 300ml (Box of 12) 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Timloc Plain Tile Vent Brown (Box of 14) 
Everbuild 502 Wood Adhesive – 1 Litre 
Oxidised Bitumen Slab - 23kg 
Circular Soffit Vent, Brown 
ALM Code 8 Milled Lead - 150mm x 6m 
Samac Copper Wire Coil 36m x 2mm Flashing Tape
Best Sellers
-
Code 4 Cast Lead – 180mm x 3m
£31.42 Incl VAT £26.18 Excl VAT Add to basket -
ALM Code 6 Milled Lead Flashing – 1600mm x 3m
£407.81 Incl VAT £339.84 Excl VAT Add to basket -
Samac Copper Clout Nails – 50mm x 3.35mm
From: £24.00 Incl VAT £20.00 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Axiome 35mm Multiwall Polycarbonate Sheet, Bronze
From: £73.24 Incl VAT £61.03 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m
£113.98 Incl VAT £94.98 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 1000mm x 6m
£606.05 Incl VAT £505.04 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
