Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Ronseal Diamond Hard Floor Varnish - Clear Gloss 5L 
Bond It Rubber Bitumen Emulsion - Black 5L 
Easy-Trim Over Fascia Vent - 25mm x 1m 
Bulk Pack 12 x Cromar Vent 3 Light Breathable Membrane - 1m x 50m 
Timloc Inline Slate Vent Black 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Siroflex Trade Acrylic Decorators Caulk - 300ml 
ALM Code 7 Milled Lead - 150mm x 3m 
Code 7 Cast Lead - 850mm x 6m 
Roughneck® Gorilla Pro-Grip Utility Bar - 376mm/15inch 
Ronseal One Coat Damp Seal - White 250ml 
Soudal Silicone Spray - 400ml 
Timloc Plain Tile Vent Red (Box of 14) 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
OX Pro Electricians Chisel - 2¼" X 10" 
Freeflow 65mm Square Down Pipe Connector - Black 
Ronseal One Coat Stays White Radiator Paint - Gloss 250ml 
Bostik Fast-Tak Permanent Adhesive - 500ml 
IKO Shed Felt - Green 10m Roll 
Easy-Trim Lead R Flashing Textured – 600mm x 5m 
Soudal Silirub 2, White - 300ml 
ALM Code 4 Milled Lead - 1000mm x 3m 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Timco Flat Wood Bit 1/4" Extension Rod - 300mm 
FloPlast Square Line Pipe Branch White – 65mm 
Code 3 Cast Lead - 510mm x 3m 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
ALM Code 8 Milled Lead - 510mm x 6m 
Hedgehog Gutterbrush Clips (Pack of 20) 
Code 8 Cast Lead - 800mm x 3m Flashing Tape
Best Sellers
-
Bond It Damp Proof Course – Black 30M
From: £6.99 Incl VAT £5.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal 5 Minute D4 Wood Adhesive Gel – 290ml (Box of 12)
£80.88 Incl VAT £67.40 Excl VAT Read more -
ALM Code 3 Milled Lead – 760mm x 3m
£96.29 Incl VAT £80.24 Excl VAT Add to basket -
Youngman Eco S Line Folding Timber Loft Ladder (34535000)
£289.33 Incl VAT £241.11 Excl VAT Read more -
Timco Cloth Tape White – 50m x 48mm
£8.29 Incl VAT £6.91 Excl VAT Add to basket -
Buckbootz BVIZ2 Yellow/Black High Visibility Waterproof Safety Lace Boot
From: £64.99 Incl VAT £64.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
