Bond It All Weather Roofing Compound - Black 5L 
ALM Code 8 Milled Lead - 1000mm x 6m 
Klober Profile-Line Flat Tile Vent - Terracotta KG9856-3-0152 (Box of 10) 
Code 8 Cast Lead - 1000mm x 6m 
Bond It Pro-Mate LMA Silicone - White EU3 
Bond It Bitumen Paint - Black 1L 
FloPlast Square Line External Stop End Black – 114mm 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
Code 6 Cast Lead - 360mm x 6m 
Circular Soffit Vent, Brown 
Siroflex Trade Superglue Activator Spray - 200ml 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 50g 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
OX Pro Chalk Refill, Red - 226g 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Timco Anti-Slip Tape 
OX Pro Chalk Refill, Yellow – 226g 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
Everbuild Industrial Superglue HV - Clear 50g 
Hambleside Danelaw Double Pantile Vent TV15/2 - Black (Box of 5) 
ALM Code 3 Milled Lead - 510mm x 6m 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g 
Everbuild ASBO Graffiti Remover - 400ml 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) Flashing Tape
Best Sellers
-
Everbuild Forever White Grout Reviver – 200ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 300mm x 3m
£65.14 Incl VAT £54.28 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 180mm x 6m
£110.45 Incl VAT £92.04 Excl VAT Add to basket -
Bond It Incredibond Solvent Free Adhesive – White 310ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
OX Pro Impact Drill & Drive Accessory Set – 40 Piece
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Everbuild Anchorset Green 300 – Grey 300ml (Box of 12)
£72.96 Incl VAT £60.80 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
