Code 3 Cast Lead - 240mm x 3m 
ALM Code 5 Milled Lead - 210mm x 6m 
Klober Profile-Line Limarech Tile Vent - Brown KG9859-3-0247 (Box of 10) 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
ALM Code 7 Milled Lead - 390mm x 3m 
Code 7 Cast Lead - 760mm x 6m 
EVO-STIK Stick Like Sh*t - White 290ml 
Soudal Trade Sanitary Silicone - White 290ml 
Code 4 Cast Lead - 210mm x 6m Flashing Tape
Best Sellers
-
OX Trade XL-10 General Purpose Segmented Diamond Cutting Blade
From: £5.99 Incl VAT £4.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Dual Purpose Foam Cleaner – 500ml (Box of 12)
£54.96 Incl VAT £45.80 Excl VAT Add to basket -
TIMCO Precision Screwdriver Bit Set -18 Pieces
£12.99 Incl VAT £10.83 Excl VAT Add to basket -
Timco Metal Cavity Anchors – M5 x 37 (45mm Screw) Pack of 70
£10.50 Incl VAT £8.75 Excl VAT Add to basket -
ALUKAP-SS High Span Bar, White or Brown
From: £222.96 Incl VAT £185.80 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Gorilla Tape – Black (48mm x 32m)
£16.49 Incl VAT £13.74 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
