Silweld Repair Tape, Black - 3m 
Everbuild Wet Rot Wood Hardener – 250ml 
Everbuild Lumberjack Wood Preserver – Clear 1 Litre 
FloPlast Half Round Downpipe 112° Bend, Brown 
Soudaseal Mirror Light Grey, 290ml 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Slate Grey (Box of 5) 
OX Tools Trade Bucket, Black - 15 Litre 
Code 6 Cast Lead - 240mm x 6m 
ALM Code 6 Milled Lead Flashing - 600mm x 3m 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Everbuild Wood Adhesive 502 – 500ml 
Code 3 Cast Lead - 1200mm x 6m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Everbuild 406 Stabilising Solution - 5 Litre 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne (Box of 12) 
FloPlast Half Round Gutter 135° - White 
ALM Code 3 Milled Lead - 240mm x 3m 
ALM Code 8 Milled Lead - 914mm x 6m 
Bond It Mould Stop - Clear 1L 
Everbuild No Waste Foam – 750ml 
FloPlast Half Round Union Unit - White 
Code 8 Cast Lead - 1600mm x 6m 
TIMCO Precision Screwdriver Bit Set -18 Pieces 
Soudal Parquet & Timber Sealant - Dark Grey 290ml Shed Felt
Best Sellers
-
Roughneck® Gorilla Bar Twin Pack – 35cm & 55cm (14in & 22in)
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Everbuild One Strike Filler – White 250ml
£5.99 Incl VAT £4.99 Excl VAT Read more -
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
Soudal Neoprene Contact Adhesive Gel Liquid, 125ML
£6.99 Incl VAT £5.83 Excl VAT Read more -
Premium Flashpoint Lead Sealant – Sand
£6.10 Incl VAT £5.08 Excl VAT Read more -
OX Pro Semi Flex Stainless Steel Trowel
From: £42.25 Incl VAT £35.21 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Frequently Asked Questions (3)
Yes, shed felt should be used on a shed as it helps prevent water entering your shed and will keep your belongings in the shed dry.
There are many brands offering shed felt. At ERoofing, we recommend using IKO shed felt or Icopal shed felt.
You could opt for felt shingles if you're not looking to use a typical shed. They offer a more stylistic look and can easily be laid without much roofing experience.
Shed Felt
We stock a great range of shed felt and roof felt perfect for your home DIY project. If you need any advice on how to felt a shed roof or the amount of felt you may need, then give us a shout or read one of our guides. Browse through our range of cost-effective, easily applied shed felt.
Replacing Shed Felt
If you need to replace your shed felt due to leaking or a simple cosmetic tear, ERoofing will have the perfect choice for you. From Chesterfelt to Icopal, we stock various suppliers that hold high-quality shed felt fit your shed or garden bar. The shed felt we stock can be felted with nails or appropriate adhesive. If you’re unsure of what you need, make sure to get in touch with us to talk about replacing or repairing your shed roof.
Alternatives to Shed Felt
If you’re not looking to use shed felt or have some reservations, you can always try out EPDM membranes. They are gradually a safe potential alternative for small garden buildings.
Installing & Laying Shed Felt
To get started, make sure to delicately terminate any existing timber fascia boards applied to the front, back and flanks of your shed. Being careful is critical as you don’t want to cause any damage. Next, use a solid hammer to remove the nails holding down the old felt roof, then strip the old felt. Make sure the surface is free and dry. If you notice any nails sticking out or missing, please replace them promptly.
You will need enough felt to cover the entire roof area with a bit of extra on each edge, around 2 inches, as this allows for overlaps.
You will need to cut three pieces of felt. Two pieces for each side of the pitched roof, and a third piece that will overlay the two side sections on each side and run along the top ridge of the shed. Apply the cut felt to either side of the roof, stretching it tight so that it lies flat before nailing it at around 10cm intervals along the length of the roof, just below the apex. Following, you can hammer in the nails along the bottom edge of the roof at wider intervals, around one every 30cm.
Once you’ve secured the side panels in place, add the top section to the ridge and fix it using high performance felt adhesive applied with a paintbrush, then hammer it at the lower edge at 5cm intervals.
Tidy up the overlap at each edge by folding it down and nailing it securely. Next, use your craft knife to cut a slit in the felt overhang at the apex of the roof, then fold the felt down there and nail securely at 10cm intervals along the roof. Use wood nails to fasten them in place and your craft knife to trim away any excess material.
