ALM Code 8 Milled Lead - 300mm x 3m 
Bond It The Beast PU Adhesive - Brown 500ml 
FloPlast Square Line Running Outlet Black – 114mm x 65mm 
Ronseal Super Flexible Smooth Finish Filler - 330g 
Cromar ProRidge Universal Ridge System - 6m Kit 
Code 6 Cast Lead - 390mm x 6m 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
Timco 30mm Cladding Pin - 250 Pieces 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Code 4 Cast Lead - 1200mm x 6m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
ALM Code 5 Milled Lead - 914mm x 3m 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
Code 5 Cast Lead - 510mm x 6m 
Klober Profile-Line Twin Plain Tile Vent - Terracotta KG9861-0152 (Box of 10) 
Colron Liquid Scratch Cover - Medium 14ml 
Permavent Plain Easy - Box of 20 
Bond It Trowel Mastic - Black 1L 
Pro Magnetic Combination Square - 300mm 
Bond It Trowel Mastic - Black 2.5L 
Cromar Bitumen Trowel Mastic - Black 1L 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
Bond It Bitumen Primer - Black 25L 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
Soudal Fix ALL Turbo - White 290ml 
Everbuild Smart Tack Handy – 500ml 
Everflex Contract 125 One Hour Caulk, Brown - 300ml (Box of 25) 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
Klober Uni-Line Flexipipe Soil Pipe 100/100mm 4" - (KG979900) 
Siroflex Trade High Viscosity Superglue - 20g 
Uses
The Everbuild 405 Path & Patio Seal – 5 Litre offers long-lasting protection for your external flooring. Everbuild concocted the 405's formula to deliver excellent protection to various surfaces, such as;
- Patios
- Paths
- Natural Stone
- Concrete
- Block Paving
Its unique formula provides a milky solution which dries into a low-sheen, slip-resistant finish. It has a powerful protection which prevents various contaminants such as;
- Sunlight damage
- Water
- Oil
- Petrol
- Organic Growth
Preparation
Remove all dirt, dust, oil, grease, algae, loose materials, and organic growth from the surface. Use a dedicated cleaner to clean the surface thoroughly. For heavy oil stains, apply a proprietary detergent. Clean very soiled areas with the same dedicated cleaner.
After cleaning, rinse the surface thoroughly using a hose and broom. Make sure to remove all traces of the cleaning products. Wait at least three months after placing the pavers before applying any coating. This waiting period allows the salts to leach out; otherwise, they will remain trapped under the sealer and cause unsightly white patches, especially in wet conditions.
Applications
- Stir well before use.
- Apply using a long-pile roller and tray or low-pressure spray.
- Apply in even, thorough coats, especially on textured areas where bonding could occur but must be avoided.
- Apply two coats, allowing 2 hours between coats. Optionally, a 3rd coat can be applied to offer a semi-gloss finish, which should be completed 4 hours after the last coat.
Limitations
- Do not use on surfaces treated with silicone or stearate-based water seals unless the surface is weathered enough to show no water-beading effects.
- Do not use if rain is imminent or within 5 hours (at 20°C)
- This product should not be applied if the air and surface temperature is below 5°C.
- Dispose of this product accordingly; do not allow it to enter watercourses.
