Ronseal Exterior Yacht Varnish - Satin 250ml 
Silweld Repair Tape, Black - 3m 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
ALM Code 7 Milled Lead - 600mm x 6m 
Code 5 Cast Lead - 800mm x 6m 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Bond It Bitumen Primer - Black 25L 
ALM Code 5 Milled Lead - 390mm x 6m 
Timloc Plain & Interlocking Tile Vent Adapter 
DeWalt XR Combi Drill & Impact Driver Twin Pack 
Soudal Swipex Wipes - 100 Wipes 
Everbuild Stick2 Carpet Fix Spray - 500ml 
OX Pro Small Trowel - 200 x 75mm 
Ronseal Precision Finish Brush - 1.5 Inch 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
Everbuild Clear Fix – 290ml 
ALM Code 8 Milled Lead - 150mm x 6m 
FloPlast Square Fascia Bracket Black – 114mm 
Freeflow 114mm Round Gutter Drain Pipe Hopper - White 
Youngman Double Section Roof Ladder 3.77m (57663600) 
FloPlast Square Line Pipe Branch White – 65mm 
ALM Code 3 Milled Lead - 240mm x 6m 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Easy-Trim Universal Dry Verge Unit - Black 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
