Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 3m 
Thompson's One Coat Waterseal - 5L 
Bond It Professional Foam Gun Applicator 
Code 6 Cast Lead - 450mm x 6m 
ALM Code 3 Milled Lead - 390mm x 6m 
Code 7 Cast Lead - 510mm x 6m 
OB41 Silicone Lubricant Spray 400ml 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Everbuild 501 PVA - 2.5 Litre 
ALM Code 5 Milled Lead - 1200mm x 6m 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Everbuild Silicone Spray - 400ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
Soudal PVCu Gap Filler, White - 300ml 
FloPlast Square Line Internal Stop End Black – 114mm 
Samac Galvanised ELH Felt Nails - 1kg (15mm x 3.00mm) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Everbuild Bath & Kitchen Sealant – White 290ml 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
ALM Code 4 Milled Lead - 600mm x 3m 
FloPlast Square Line Downpipe Clip White 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
This WP70 Neutral Oxime Silicone is a high-quality, neutral cure silicone for perimeter sealing external wood and PVCu windows and door frames. It has a rapid curing composite which has excellent adhesion properties to most common building materials such as; glass, aluminium and painted surfaces.
There are some limitations to this product if the intended application surface is porous, you must prime the surface prior. If the surface is so porous that water can seep into the bond, be sure to carry out remedial work. This product will not work on natural stone nor in aquaria settings; asphalt and bitumen are also not advised, and painting over the sealant is not recommended. If your intended location is a low UV light area, the bond will be at risk of yellowing.
Application
Before you begin the application, ensure that you clean the surfaces prior. Remove all contaminants that can hinder adhesion, this includes dust, grease, oil and more. After you've cleaned the surface, make sure it is dry. If the intended application on movement joints, a backing material is suggested, Bond It Expanding Foam range is suitable, or a backing tape or rod. If the surface is porous, as mentioned above, be sure to prime it to optimise the adhesion.
- Use a standard applicator tool that can take EU3 cartridge (380ml)
- Cut the nozzle at a 45° angle with a size slightly larger than the intended gap
- After application, tool down using a sealant applicator tool
- Protect the sealant for 3 hours due to it possible cracking with movement
