Bond It Mould Stop - Clear 2.5L 
Evercryl Emergency Roof Repair - Clear 310ml 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Everbuild Stainblock - White 400ml 
Spax Magnetic Bit Holder - 1 Piece 
Everbuild Wood Filler Hardener / Catalyst - 40g 
FloPlast Square Line Internal Stop End Black – 114mm 
Timco Polypropylene Rope - Blue 30m 
FloPlast Universal Hopper, Black – 65-68mm 
Armatool High Visibility Marking chalk (200g) 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
ALM Code 5 Milled Lead - 450mm x 6m 
Code 4 Cast Lead - 800mm x 6m 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Timco Lifting Sling 2000kg / 2 Tonnes 
Timloc Double Roman Tile Vent Brown (Box of 6) 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Charcoal 10m x 1m 
Bond It Bitumen Primer - Black 2.5L 
Bond It Aluminium Foil Tape - 50mm x 45M 
Uses
The Aluminium Solar Reflective Paint by Bond It is an excellent solution to provide protection against solar degradation and heat gain. This paint is forged using a thin, bituminous-based aluminium coating of brushing consistency that dries into a silvery reflective finish. It's ideal for application onto roof spaces, it can also be applied directly over other bituminious coatings, sealing primers, paints, or similar products.
Preparation
Ensure the surface is structurally sound and free from contaminants that can hinder the adhesion, including dirt, dust, grease, oil, etc. Any organic growth must be removed, which is best achieved using a fungicide. Some weathered surfaces may require a bitumen primer to be applied prior to ensuring optimal bonding.
Application
- Stir the product very thoroughly before using it.
- Do not thin the paint; apply immediately and continue stirring it throughout the application.
- Apply to the surface using a brush or pile roller, applying the lightest of pressure, and ensuring the you are applying a thin coat of the product.
- Allow a sufficient amount of time to dry before applying a second coat, which can take up to 1 hour.
Limitations and Notes
- When applying the solar reflective paint on a bitumen surface, you must allow;
- Hot Applied Coating - 24 Hours
- Solvent-Based Coating - 10 Days
- Water-Based Coating - 14 Days
