Bond It Duct Tape - Silver 48mm x 45M 
Permavent Easy Slate 600 - Pack of 20 
FloPlast Half Round Stop End Outlet, Black – 112mm 
Bond It Cove-Mate Coving Adhesive - White EU3 
Timco Skeleton Gun 
Everbuild XT44 Maintenance Spray - 400ml 
Armatool Leather Pouch & Leather Belt 
Code 7 Cast Lead - 240mm x 3m 
Timloc Non-Profile Tile Vent Black (Box of 8) 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Thompson's uPVC Restorer - 480ml 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Timloc 5" Aero Core with Cowl & Baffle Terracotta 
Timco Flat Wood Bit Set 
Everbuild Resiblock Trade – Clear 5 Litre 
Hambleside Danelaw MONO6+ Dry Fix Ventilated Mono Ridge System 6m 
FloPlast Square Union Unit - Black 
Gorilla Heavy Duty Mounting Tape - Crystal Clear (25mm x 1.5m) 
OX Pro Grout Remover 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Timloc Felt Support Tray 600mm 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Timloc Double Pantile Tile Vent Red (Box of 6) 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
Everbuild Safer Spirit - 750ml 
Timco Grouting Float 
Bond It SBR Admixture - White 2.5L 
This wood guard decking oil delivers your decking a natural-looking protection, this is done by replacing the natural oils in the wood. It provides a water-proof protective barrier that defends against constant weathering, which can cause swelling and warping. Suitable for application on untreated, previously oiled or weathered decking.
For new decking, the timber should be allowed to weather for a minimum of 6 months before using decking oil. Some water splashes onto the wood to show if it sits in beads will let you know if it needs decking oil. If it sits, it doesn't need deck oil.
For oil decking, use wood guard decking cleaner to remove any grease, dirt, oil, mildew and all other contaminants. Any loose or flaking material should also be removed.
Application
- Ensure the decking is dry. If there are wet conditions or expected rainfall, do not apply.
- Shake oil can thoroughly before use.
- Apply a flood coat using a brush or roller.
- Let to dry for 6 hours.
- Apply a second coat.
- Leave for 24 hours before enabling people to walk over the decking.
