Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
OX Pro Chalk Refill, Blue - 226g 
ALM Code 8 Milled Lead - 360mm x 6m 
Code 5 Cast Lead - 800mm x 6m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Code 4 Cast Lead - 510mm x 6m 
Soudal Repair Express Plaster - White 900ml 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Ronseal Precision Finish Brush - 2 Inch 
Bond It The Beast PU Adhesive - Brown 250ml 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Bond It Professional Foam Gun Applicator 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Bond It Felt Adhesive - Black 5L 
Bond It Rubber Bitumen Emulsion - Black 25L 
The Bond It Flash-Mate Lead Sealant is a low modulus neutral cure roof sealant that can effectively prevent weather ingression, tile lift and noise. Ideally used for sealing roof lights, conservatories, glass houses, guttering, industrial roofing systems and lead flashings. This product can also be used to bond glass and glazing plastics.
Compatible with a multitude of surfaces such as: lead, galvanised steel, concrete, brick and all metals. The sealant offers outstanding UV, heat and ozone resistance.
Application
Prior to application, ensure all surfaces are clean and dry. Remove any loose debris, grease or contaminants present that may hinder adhesion. If applying to a porous surface, priming may be necessary
- Apply using a standard sealant gun.
- Cut the nozzle at a 45° angle, with the opening slightly larger than the intended joint to seal.
- Wait 5-10 minutes after application, then smooth down using a sealant smoothing tool.
Polyethylene foam backing rods should be used for significant gaps and then sealed. This provides a stronger bond and prevents use of excess sealant.
