ALM Code 5 Milled Lead - 850mm x 6m 
ALM Code 7 Milled Lead - 360mm x 3m 
Code 4 Cast Lead - 1600mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Black - 300ml (Box of 12) 
Everbuild 404 Fungicidal Wash – 1 Litre 
Code 6 Cast Lead - 390mm x 3m 
Code 8 Cast Lead - 180mm x 3m 
Bond It No Crack Caulk - White 310ml 
Bond It Silicone Release Spray - 500ml Clear (Mould Releasing Lubricant) 
Soudal Trade Gun and Foam Cleaner - 500ml 
Colron Liquid Scratch Cover - Light 14ml 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
Bond It PVA & Adhesive Sealer - White 1L 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Standard Brush 4-Inch 
Soudal Soudalead PB Lead Sealant - Grey 300ml 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Bond It PVCu Solvent Free Cream Cleaner - White 1L 
Soudal Glass and Mirror Cleaner - 1 Litre 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
ALM Code 8 Milled Lead - 300mm x 3m 
Siroflex Trade High Viscosity Superglue - 20g 
The Incredibond Solvent Free Adhesive by Bond It has a high initial wet tack, therefore, it can hold more weight immediately. This product's ability also enables it to initiate adhesion instantly, with it forming a bond as soon as the two surfaces come into contact.
This all-rounded adhesion is an excellent bonding adhesive for almost any surface or material, these include; skirting boards, covings, architraves, dado rails, polystyrene mouldings and key holders, most common building materials, wood, OSB, chipboard, concrete, plaster, mortar, ceramic, metal (galvanised) steel, uPVC and most plastics. Please note that if you bind two surfaces together and one isn't porous, you'll have to wait longer for it to dry.
Application
Before starting the application, ensure all surfaces are prepared before. Complete this by removing all contaminants present that may hinder the adhesion, including dust, grease, oil and any loose debris present. Friable surfaces or laitance must be removed before application
- Cut the tip of the cartridge, taking care not to damage the threaded area
- Screw the nozzle supplied and cut the tip to the desired bead size
- Apply using a standard sealant gun, completing the full application with a continuous bead.
- Press the two parts together, do this by hand or get a rubber mallet and tap them together.
You may have to way 24-48 hours before applying a load to the newly bonded surface.
