OB41 Electrical Contact Cleaner - 400ml 
Soudal Compact Foam Gun PU Foam 
OX Trade Stubby Level - 100mm 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Thompson's Water Seal - 2.5L 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
ALM Code 4 Milled Lead - 240mm x 3m 
Bond It Mega Stik PU Adhesive - Beige 750ml 
FloPlast Half Round Gutter 90° Bend, Black – 112mm 
FloPlast Square Line Running Outlet White – 114mm x 65mm 
Bond It Power Frost Premium Quality Concentrate Additive - 1L Pale Blue 
Code 5 Cast Lead - 180mm x 3m 
Klober Regent Tile Vent KG6084, Dark Brown 
Hambleside Danelaw (HD PCA) Tile Vent Adaptor for TV10 range 
Timco Round Wire Nails, Pack of 40 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Everbuild XT44 Maintenance Spray - 400ml 
Bond It Aluminium Foil Tape - 100mm x 45M 
Code 7 Cast Lead - 360mm x 6m 
Freeflow 65mm Square Down Pipe Connector - Black 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750ml (Box of 12) 
Bond It All Weather Roofing Compound - Black 2.5L 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
OX Tools Pro Heavy Duty Flexi Tub - 20L 
Bond It Cove-Mate Coving Adhesive - White EU3 
Soudal Soudafoam Window & Door Gun Grade – 750ml (Box of 12) 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
