Klober 15x9 Tile Vent - Brown KG9690-0247 (Box of 10) 
Timco Air Wedge 
Soudal PVCu Solvent Frame Cleaner - 1L 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
OX Heavy Duty Soft Gel Filled Knee Pad 
Code 8 Cast Lead - 240mm x 3m 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Bond It FG8 Food Grade Silicone - White 310ml 
Bond It Economy Sealant Gun - Blue 900ml 
Restec GRPROOF 1010 Base Coat Resin - 10kg 
ALM Code 3 Milled Lead - 450mm x 6m 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Code 6 Cast Lead - 390mm x 6m 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
OX Tough Builders Socks (UK 6-11) 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Slate Grey (Box of 5) 
Bond It Contractors Grade PVA - White 500ml 
Everbuild Seal Rite Strip Out Tool 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Lead Hall Fixing Clips - Pack of 50 
ALM Code 7 Milled Lead - 360mm x 6m 
1201 Telescopic Underfloor Vent 3-5 Courses 
500 x Felt Support Trays 1.5m (Half Pallet) 
Bond It Rubber Bitumen Emulsion - Black 25L 
Uses
The Aluminum Paint by Cromar is an exceptional, high-performance roof coating that defends against the harmful effects caused by sunlight, reflecting UV rays away from the substrate below and extending the roof's lifespan. Cromar's aluminium paint can be applied directly to bituminous roofs, which is perfect for protecting them, whether it's roofing felt or bitumen paint. Other application areas include exposed steel, corrugated iron, and other metallic surfaces; even mineral surfaces, including concrete, are suitable.
Preparation
Before commencing the application, preparing the area is vital to achieve optimal and professional results. Start by cleaning the surface, removing contaminants that can hinder the adhesion of the paint, including dirt, dust, grease, oil, loose debris and even organic growth. A stiff brush is the best tool to clear the surface of impurities, but a fungicide is recommended for organic growth as it will kill them and prevent them from returning. Roofing felt should receive a primer, and then they're ready for the aluminium paint.
Application
- Any fresh bitumen coating on the roof must have 3 - 5 days of curing before applying the aluminium paint.
- Stir it thoroughly before use.
- Using a brush or airless spray, apply the first coat to the surface and allow it to dry.
- Once it's dried, apply the second coat to the surface.
- Take care not to apply either coat too thick; otherwise, bronzing may occur. Bronzing can also happen if rain falls before it's cured.
