Klober Universal Tile Vent Brown KG9854 (Box of 10) 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Armatool Longo Chalk Reel 30m & Fluorescent Chalk Orange 
Bond It Mould Stop - Clear 1L 
Siroflex PVCu Trim & Mitre Cutter 
Code 3 Cast Lead - 600mm x 3m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Ronseal 3 in 1 Basecoat - White 2.5L 
Timco M6 Zip-Fix Cavity Wall Fixing - 10 Pieces 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
OX Pro Electricians Chisel - 2¼" X 10" 
Timloc Underlay Felt Lap Vent 
Soudal Silirub 2, White - 300ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Everbuild Mitre Fast Activator – 200ml 
FloPlast Universal Hopper, White – 65-68mm 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Armatool 30m Longo Chalk Line 
Bond It PVA & Adhesive Sealer - White 1L 
Samac Copper Wire Coil 36m x 2mm 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Bond It All Weather Roofing Compound - Black 25L 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Soudal 5 Min D4 Gel PU Wood Adhesive Trade - 290ml 
FloPlast Half Round Union Unit - White 
Ronseal Diamond Hard Doorstep Paint - Black Satin 750ml 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Uses
The 206 Strike Release Oil by Everbuild is an excellent product that's vital in the manufacturing and application of concrete. It uses its solvent and mineral oil-free emulsion to enable concrete shuttering, allowing the safe removal of the shuttering without damaging the existing concrete. Other applications this product can be used for include;
- 206 Strike Release Oil acts as a release agent for smooth, non-absorbent formwork, absorbent formwork, heated formwork (up to 70°C) and textured formwork.
Preparation
All formwork should be cleaned and dry before application. Any residues of rust or concrete must be removed.
Application
- Stir the product thoroughly before using
- Apply undiluted by spray, brush or roller
- Apply a thin, even coverage to the surface; if you overapply this product, you'll cause 'dusting' on the surface.
- Any excess material in moulds should be mopped up before concrete placement.
- For new and unsealed timber or other high-absorbent formwork, pre-treatment is recommended with a second coat before use
- After application, an evaporation period of 20 minutes (at + 20°C) should be observed before casting.
Limitations and Notes
- Only apply a thin film; overdosing can cause dusting.
