Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Easy-Trim Universal Dry Verge System Black (Pallet of 800) 
Code 8 Cast Lead - 760mm x 6m 
Code 7 Cast Lead - 450mm x 6m 
Everbuild 404 Fungicidal Wash – 5 Litre 
Everbuild Flexible Decorators Filler – 290ml (Box of 12) 
Code 6 Cast Lead - 914mm x 3m 
Bond It Rain-Mate All Weather Sealant - Black EU3 
ALM Code 8 Milled Lead - 390mm x 6m 
ALM Code 4 Milled Lead - 240mm x 6m 
Soudal Sealant Remover – 400ml 
Code 5 Cast Lead - 390mm x 3m 
Soudal Soudaduct - Grey 300ml (Box of 12) 
Everbuild Caulk Once – White 295ml 
Timco Cloth Tape White - 50m x 48mm 
Everbuild Instant Nails – White 290ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 390mm x 3m 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
Uses
This Everbuild All Purpose Ready Mixed Filler is essential for any D.I.Y enthusiast or Tradesman looking to repair various surfaces. This product dries to a smooth but tough, crack-resistant sandable finish, allowing you to perfectly repair a hole to a flush finish. This product is suitable for internal and external use, offering various areas of applications; this product is suitable for surfaces such as;
- Plaster
- Brick
- Wood
- Stone
- Render
Preparation
You must prepare all surfaces correctly to achieve a good key and optimal adhesion. Remove any dust, oil, dirt, grease or similar contaminants, cover any nail or screw heads with oil-based paint and allow to dry.
Application
- Stir well before use and apply directly from the tub into the filling area.
- This product can fill a gap with a maximum depth of 9mm. If you want to fill a more significant depth, apply in layers and allow 1 hour between each layer so it can fully cure.
Limitations
- Do not use to fill plastics or metals.
- This product is unsuitable to be applied when rain is imminent or within 5 hours of application.
- Do not apply in temperatures below 5°C.
- Not suitable for repairs in permanently wet areas
- Do not apply more than 9mm depth per application. (e.g. if the gap is 27mm deep, it will take 3 coats at 9mm depth each with an hour between each one)
