Everbuild Stixall Extreme Power - Clear 290ml (Box of 12) 
Thompson's Water Seal - 5L 
Everbuild Roof & Gutter Sealant – Black 295ml 
Left Hand Klober Uni-Click Dry Verge Units Terracotta 
ALM Code 3 Milled Lead - 240mm x 6m 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Timco Metal Cavity Anchors - M5 x 37 (45mm Screw) Pack of 70 
Klober Adaptor For 20K Vents - KG979700 
Code 6 Cast Lead - 150mm x 3m 
FloPlast Square Line Shoe Black – 65mm 
Bond It Patio Seal Paving & Patio Sealer, Clear - 5L 
Timco Driver and Ground Jobber Bit Set 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
Code 7 Cast Lead - 360mm x 6m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Samac Half Round Snowguard Bracket - 150mm (6") 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
FloPlast Half Round External Stop End, Brown – 112mm 
Silweld Repair Tape, Black - 3m 
Everbuild Mitre Fast Activator – 200ml 
Easy-Trim Lead R Flashing Textured – 450mm x 5m 
Everbuild Stixall Extreme Power – Brown 290ml 
Timco Professional Wire Strippers 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre offers an outstanding protective coat for most common building surfaces. It is waterproof, weatherproof and corrosion-resistant, ensuring the surface is protected against weather conditions. This product is suitable for multiple surfaces, some of these include;
- Wood
- Felt
- Iron
- Steel
- Lead
- Zinc
- Aluminium
- Asbestos-cement
- Concrete
- Stone
- Brick
Preparation
Prepare the surface before starting the application.
Ensure the surface is sound, stable, and thoroughly clean. Wire brush off any loose rust or flaking material on metal surfaces, including any paint. For new galvanised metal, use a wire brush to roughen the surface for optimal adhesion.
To enhance long-term protection, you can prime the surface with a rust-inhibitive product such as red lead or zinc phosphate. Porous surfaces should be primed with a bitumen primer.
Application
- This product comes ready to use; stir it thoroughly before using.
-
Limitations
- This product is not suitable to be in contact with solvents.
- This product should not be used for potable drinking water tanks.
- Avoid inhaling the vapours.
- Allow the surface to dry entirely before applying a second coat.
- If you want to apply paint over it, this product will likely bleed through it, but a primer used between the bitumen paint and regular paint should prevent that.
