ALM Code 7 Milled Lead - 240mm x 6m 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
FloPlast Square Line Pipe Connector White 
Timco Ratcheting Screwdriver 46-Part Set 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml 
Freeflow Square Gutter System Gutter 135° Angle - White 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Siroflex Trade Mortar Repair Cement - Grey 300ml 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Timco Metal Tapping Screws - PZ Pan Self-Tapping 4 x 3/8 Pack of 1000 
Timloc Universal Slate Roof Vent PVC Pipe Only 
ALM Code 3 Milled Lead - 850mm x 3m 
Ronseal Crystal Clear Outdoor Varnish - Satin 250ml 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 20g 
Bond It Silicone Ultra Waterseal - Clear 5L 
FloPlast Universal Hopper, Brown – 65-68mm 
Timloc Double Roman Tile Vent Red (Box of 6) 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Timco FirmaHold Collated ST Brad Nails A2 SS - 18g x 5000 PCS 
Soudal Mitre Bonding Kit Superglue Adhesive & Activator - (Box of 24) 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Uses
The Black Jack 906 Roofing Emulsion by Everbuild is a unique water and bitumen-based emulsion that provides excellent waterproofing for roofs and provides outstanding protection against the corrosion of pipes and structural steelwork. Applications that this product is used in include general waterproofing of roofs, metal protection and insulation. The way this product aids in insulation is due to the 906's ability to provide a vapour barrier, perfect for cold storage rooms, mushroom houses and similar installations.
Preparation
It's essential to properly prepare the area before applying the 906. You should clean the surface, removing any contaminants that can hinder the adhesion; these include dirt, oil, dust, grease, etc. Any organic growth present needs to be removed correctly. The best way to achieve this is to use a dedicated mould killer, saturate the area, allow it to die and wipe the surface clean. Any porous surface will require a roofing primer applied to the surface and allowed to dry thoroughly before applying the 906 on top. It's crucial to complete any remedial work to the surface before applying; significant gaps, unsound structures or surface damage will hinder this product.
Application
- Open the tin and stir it thoroughly
- Apply using a brush working at a rate of ¾ of a litre per square metre.
- Apply the coats at right angles to each other and allow 24 hours between coats
- You should apply at least two coats to achieve optimal results
Optionally, you can extend the life of the 906; applying an overcoat such as solar reflective paint can achieve this.
Limitations
- Do not apply when rain is imminent.
- Protect from rain and frost until cured. To understand if it's cured, wet a finger and rub it over the surface, and if it doesn't produce a brown stain, it's cured.
- Do not use in areas where subsequent solvent contact is likely.
- This product may bleed through any paint applied over it. If you want to paint over it, you should contact the paint manufacturer that you want to overcoat to check compatibility.
