ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Code 3 Cast Lead - 760mm x 3m 
Code 5 Cast Lead - 390mm x 3m 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Cromar Roof Felt Adhesive - Black 1 Litre 
ALM Code 4 Milled Lead - 1200mm x 6m 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Bond It Dustproof & Hardener - Clear 5L 
Everbuild Bath & Kitchen Sealant - 200ml 
ALM Code 3 Milled Lead - 360mm x 6m 
Bond It High Gloss Block Sealer - Clear 5L 
Code 7 Cast Lead - 180mm x 3m 
Code 6 Cast Lead - 450mm x 6m 
Timco Lithium EP2 Grease - 400g 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
Everbuild 501 PVA – 500ml 
Uses
The Mammoth Carpet Fix Cloth Tape by Everbuild is a simple-to-use and apply carpet tape. It has been formulated with a hot melt rubber adhesive, and it can achieve optimal adhesion to most common surfaces. This product does give confidence to those who use it due to its high-tack adhesive, which secures the carpet to the floor, preventing it from sliding around.
Preparation
It's important to prepare surfaces before applying the tape; otherwise, you'll compromise the adhesion. Prepare the surface by removing any contaminants that can interfere with the bonding process; this includes dirt, dust, oil, grease and similar impurities.
Application
- Remove the outer packaging from the product
- Peel a small amount of tape, apply it to the surface and unravel the rest if the tape whilst continuing the application
- Peel the film off the other side of the tape and press both surfaces together
Limitations
- This product is not suitable for surfaces that bleed oils or plasticisers
