FloPlast Square Line Gutter 90° Black – 114mm 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
Ronseal Precision Finish Brush - 2 Inch 
ALM Code 8 Milled Lead - 914mm x 3m 
Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Code 3 Cast Lead - 760mm x 6m 
Klober Double Pantile Vent - Terracotta KG9858-3-0152 (Box of 10) 
Soudal Construction Silicone, Clear - 290ml 
ALM Code 3 Milled Lead - 850mm x 3m 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml (Box of 12) 
ALM Code 4 Milled Lead - 450mm x 6m 
Code 5 Cast Lead - 450mm x 6m 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Bond It De-Bond Mate Silicone Sealant Remover Gel - 125ml Amber/Brown 
Timco Aluminium Hawk 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Bond It Trowel Mastic - Black 5L 
Siroflex Contractors PVCu Silicone - Clear 300ml 
Everbuild Showerproof Bathroom Silicone – White 280ml (Box of 12) 
OX Pro Impact Bit Set - 11 Piece 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 750ml 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
