Code 7 Cast Lead - 1200mm x 6m 
OX Pro Super Open Mouth Tool Bag 
Bond It Economy Sealant Gun - Blue 300ml 
Code 4 Cast Lead - 914mm x 3m 
Everbuild Everflex 125 One Hour Caulk Magnolia 300ml (Box of 25) 
Code 8 Cast Lead - 800mm x 6m 
ALM Code 3 Milled Lead - 800mm x 6m 
Soudal Roof & Gutter Sealant – Black 290ml 
Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
ALM Code 7 Milled Lead - 210mm x 3m 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Code 5 Cast Lead - 180mm x 6m 
Timloc Underlay Felt Lap Vent (Pack of 10) 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Armatool Batten Gauge - Up to 14" 
Soudal Fix ALL X-treme Power - White 290ml 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Everbuild Multi-Stick Adhesive - White 350ml 
ALM Code 5 Milled Lead - 210mm x 6m 
Code 6 Cast Lead - 360mm x 3m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
