Timloc Inline Slate Vent Black (Box of 5) 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
Everbuild Evercryl One Coat Grey – 20kg 
Timco Lithium EP2 Grease - 400g 
Soudal Superglue Activator - 200ml (Box of 12) 
Code 5 Cast Lead - 390mm x 6m 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Antique Red (Box of 5) 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Soudal Repair Express Plaster - White 250ml 
ALM Code 3 Milled Lead - 300mm x 3m 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
OX Pro Chalk Refill, Blue - 226g 
Everbuild Gun A Nail Standard – White 310ml (Box of 25) 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Soudafoam Window & Door Hand Held - 750ml 
Code 3 Cast Lead - 510mm x 3m 
ALM Code 5 Milled Lead - 760mm x 3m 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
