Sika Damp-Proof Slurry Grey - 25kg 
Everbuild Smart Tack Handy – 500ml (Box of 12) 
Timco Precision Screwdriver Set 6pcs 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Timco Ratcheting Screwdriver 46-Part Set 
FloPlast Black Half Round Adjustable Angle - 50° to 156° 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Code 4 Cast Lead - 1600mm x 6m 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Code 3 Cast Lead - 180mm x 6m 
Code 5 Cast Lead - 180mm x 3m 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Cast Lead Dome Set (Lead Dots) - Pack of 20 
FloPlast Half Round Union Unit - White 
Code 8 Cast Lead - 450mm x 3m 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Bond It Rubber Bitumen Emulsion - Black 5L 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
ALM Code 7 Milled Lead - 914mm x 3m 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
Everbuild Lumberjack® Woodworm Killer - Clear 5L 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 100mm 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
ALM Code 4 Milled Lead - 800mm x 3m 
Bond It Power Proof Concentrated Waterproof Render Admixture - 1 Litre 
Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
