OB41 Multi-Use Brake Cleaner - 400ml 
Siroflex Trade High Viscosity Superglue - 20g 
Code 3 Cast Lead - 180mm x 3m 
Code 8 Cast Lead - 510mm x 3m 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Ronseal One Coat All Surface Primer and Undercoat - White 750ml 
FloPlast Square 112° Offset Downpipe - White 
Hambleside Danelaw TV15/7 Tile Vent - Slate Grey (Box of 5) 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
ALM Code 3 Milled Lead - 150mm x 3m 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
Bond It Oil Stain Remover - White 1L 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Timco Precision Screwdriver Set 6pcs 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Freeflow Round 112mm Gutter System 135° - Black 
Ulti-Mate Cambrian Grey Tile Vent 
Samac Hall Hooks - (Bags of 10) 
OX Tools Pro Chalk Line Reel 30m / 100ft 
Ronseal One Coat Stain Block - White 750ml 
Ronseal uPVC Cleaner - 750ml 
ALM Code 8 Milled Lead - 1200mm x 6m 
ALM Code 4 Milled Lead - 510mm x 6m 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
