Code 4 Cast Lead - 1600mm x 3m 
Bond It Glass Cleaner - Clear 1L 
10 x Permavent Black Breather Membrane – 1m x 50m 
Code 8 Cast Lead - 180mm x 3m 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Timco FirmaHold Collated ST Brad Nails A2 SS - 18g x 5000 PCS 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
FloPlast Black Half Round Adjustable Angle - 50° to 156° 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
OB41 Multi-Use Brake Cleaner - 400ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
Code 6 Cast Lead - 240mm x 3m 
Cromar Cold Gritting Solution - Black 5 Litres 
Code 7 Cast Lead - 180mm x 3m 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
Everbuild Forever Ivory Silicone Sealant – 295ml 
The Filler Coat by Everbuild is a high-quality, unique product used to seal over previous fillers and hairline cracks, delivering a key ideal for subsequent decorating. It's delivered in a ready-to-use tub that is applied through a simple pile-roller application. It's ideal for covering intense colours and, therefore, perfect for transforming rooms from a bright pink to a bright blue.
Preparation
Prepare the area to achieve optimal results. Start by ensuring the surface is sound, stable and free from contaminants such as dirt, dust, oil, grease, loose debris, etc. Glossy surface must be sanded and cleaned with a sugar soap before applying.
Application
- Stir the Filler Coat well before use
- Touch in corners using a brush, whilst, with open areas, you can use a pile-roller. Try not to overspread.
- Leave the surface to dry for at least 4 - 6 hours; please note it may take longer if the temperatures are cold.
Limitations and Notes
- Do not apply in temperatures below 10°C
- This should not be applied to heated surfaces
- This product will fill small imperfections on a surface, but it will not fill significant gaps.
- Very porous and powdery surfaces must be primed before painting
- New plaster must be primed and fully dry before applying the filler coat
- Do not use in contact with bitumen.
