Everbuild Stick2 Superglue De-Bonder - 20ml 
Sikabond PVA - White 5 Litre 
Timloc Inline Slate Vent Black 
ALM Code 4 Milled Lead - 450mm x 3m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Code 5 Cast Lead - 760mm x 3m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Everbuild Power Pro Sealant Gun - C4 (290ml - 400ml) 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Siroflex Trade Superglue Activator Spray - 400ml 
ALM Code 5 Milled Lead - 510mm x 3m 
Code 4 Cast Lead - 210mm x 6m 
Standard Brush 4-Inch 
Everbuild No Waste Foam – 750ml 
Code 7 Cast Lead - 510mm x 3m 
OX Trade Plastic Speed Rafters Square Set 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Terracotta (Box of 5) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Slate Grey (Box of 5) 
Everbuild Exact Gap Foam - 750ml 
ALM Code 7 Milled Lead - 150mm x 6m 
Gorilla Wood Glue - Brown 236ml 
Ronseal Precision Finish Brush - 0.5 Inch 
Code 8 Cast Lead - 210mm x 3m 
OX Pro Double Handle Pool Trowel 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Uses
The Forever Range by Everbuild is a high-quality mould shield product that can achieve up to 10 years of life without any signs of organic growth, including mould, mildew, or bacteria. It's perfect for application areas that suffer from high humidity levels, achieved by its ability to resist water and organic growth. Overall, it's a highly flexible bond that won't suffer from deteriorating for decades to come. Application this product is typically applied in include;
- Sealing baths, showers, wetrooms, sanitary ware, kitchens, ceramic tiles and all application areas of high humidity or areas that demand hygiene protection
- Sealing around window and door frames internally, which are subject to high levels of condensation
Preparation
Before commencing the application, preparing the substrates is vital to ensure you achieve optimal results. Clean the surface by removing contaminants that can interfere with the adhesion, including dirt, oil, grease, dust, etc. Deep gaps should have an expanding foam applied to prevent wasting the sealant. If you're using this product for plastic or acrylic baths, fill it half full with water during the sealing and curing process; this will allow it to accommodate being full and empty.
Application
- Start by cutting the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle, with an opening slightly larger than the gap to be filled.
- Point the tip of the nozzle to one end of the gap and apply one singular bead along the whole surface. (Note: you can use masking tape to help prevent you from making a mess)
- After applying the sealant, tool it down within 15 minutes before the skin starts to form.
Limitations and Notes
- This product is not suitable for application on surfaces that bleed oils or plasticisers
- Do not apply this on substrates or areas that are bitumen/pitched-based
