Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 3m 
Thompson's One Coat Waterseal - 5L 
Bond It Professional Foam Gun Applicator 
Code 6 Cast Lead - 450mm x 6m 
ALM Code 3 Milled Lead - 390mm x 6m 
Code 7 Cast Lead - 510mm x 6m 
OB41 Silicone Lubricant Spray 400ml 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Everbuild 501 PVA - 2.5 Litre 
ALM Code 5 Milled Lead - 1200mm x 6m 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Everbuild Silicone Spray - 400ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
Soudal PVCu Gap Filler, White - 300ml 
FloPlast Square Line Internal Stop End Black – 114mm 
Samac Galvanised ELH Felt Nails - 1kg (15mm x 3.00mm) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Everbuild Bath & Kitchen Sealant – White 290ml 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
ALM Code 4 Milled Lead - 600mm x 3m 
FloPlast Square Line Downpipe Clip White 
ALM Code 7 Milled Lead - 240mm x 6m 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
FloPlast Half Round Square Line Gutter Adaptor - White 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - Black 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
Bond It Rubber Bitumen Emulsion - Black 5L 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
Uses
The Forever Range by Everbuild is a high-quality mould shield product that can achieve up to 10 years of life without any signs of organic growth, including mould, mildew, or bacteria. It's perfect for application areas that suffer from high humidity levels, achieved by its ability to resist water and organic growth. Overall, it's a highly flexible bond that won't suffer from deteriorating for decades to come. Application this product is typically applied in include;
- Sealing baths, showers, wetrooms, sanitary ware, kitchens, ceramic tiles and all application areas of high humidity or areas that demand hygiene protection
- Sealing around window and door frames internally, which are subject to high levels of condensation
Preparation
Before commencing the application, preparing the substrates is vital to ensure you achieve optimal results. Clean the surface by removing contaminants that can interfere with the adhesion, including dirt, oil, grease, dust, etc. Deep gaps should have an expanding foam applied to prevent wasting the sealant. If you're using this product for plastic or acrylic baths, fill it half full with water during the sealing and curing process; this will allow it to accommodate being full and empty.
Application
- Start by cutting the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle, with an opening slightly larger than the gap to be filled.
- Point the tip of the nozzle to one end of the gap and apply one singular bead along the whole surface. (Note: you can use masking tape to help prevent you from making a mess)
- After applying the sealant, tool it down within 15 minutes before the skin starts to form.
Limitations and Notes
- This product is not suitable for application on surfaces that bleed oils or plasticisers
- Do not apply this on substrates or areas that are bitumen/pitched-based
