Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Everbuild Salt-Away Sprayable Salt Remover – 1 Litre 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Everbuild Feb® Rendamix - 5L Amber 
Soudal Construction Silicone, Clear - 290ml 
SikaBond Waterproof PVA – 5 Litre 
ALM Code 8 Milled Lead - 1200mm x 6m 
ALM Code 7 Milled Lead - 760mm x 6m 
Timco FirmaHold Collated ST Brad Nails A2 SS - 18g x 5000 PCS 
Bond It D4 Professional Wood Adhesive - Clear 1L 
Gorilla Wood Glue - Brown 532ml 
Bond It High Gloss Block Sealer - Clear 5L 
FloPlast Half Round Square Line Gutter Adaptor - Black 
Code 7 Cast Lead - 1200mm x 3m 
Soudal Gap Filler Expanding Foam Gun Grade - 750ml 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Uses
This product has outstanding properties, allowing it to be used on various surfaces in various environments. It is suitable for sealing around baths, showers, basins and other sanitary ware, and it can also seal worktops, laminates and aluminium gutters. You can also use this product as an adhesive, and it's excellent for fixing PVCu Trims, cladding and panels together.
Preparation
Before you can begin the application, you must prepare the surfaces. You can achieve this by removing dust, loose flakes, old sealants, grease, oil and other contaminants that can hinder the adhesion. Once you have completed this, make sure you dry the surface, and then you can begin application.
If the application area has a large gap, use an expanding foam or joint backing rod to support the silicone bond. Otherwise, you'll use more silicone sealant than needed to fill the void.
Applications
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle, with the size slightly larger than the gap.
- Screw the nozzle onto the top of the cartridge and place the cartridge into a standard sealant gun/applicator.
- Apply the tip to one end of the gap and use a continuous, even bead along the gap, ensuring you cover it all.
- Smooth down within 15 minutes, and you should use an applicator tool or a wooden spoon or spatula with a soapy solution on it. If you use your finger with water, you risk infecting the silicone, risking mould growth.
Limitations
- You should not use it for aquarium manufacture
- This product isn't suitable for use in conjunction with bitumen or asphalt
- Certains highly porous surfaces like concrete or stonework will require priming as adhesion may be weak
- Do not apply on substrates that bleed oils or plasticisers
- Not suitable for application of double glazing units
- Not suitable for perimeter pointing of PVCu
- Do not apply onto soft metals like lead and brass
- No suitable for paints to be applied on top of.
