Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Gorilla Tape - Black (48mm x 32m) 
Code 5 Cast Lead - 180mm x 6m 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
FloPlast Square Line Pipe Branch Black – 65mm 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
Permavent Easy Slate 500 - Box of 100 
Easy-Trim Universal Dry Verge System Black (Pallet of 800) 
Thompson's uPVC Restorer - 480ml 
Timco Screwdriver 9-Tool Set 
ALM Code 3 Milled Lead - 850mm x 6m 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Soudal Construction Silicone, Grey - 290ml 
Ronseal Quick Drying Radiator Spray Paint - White Gloss 400ml 
Everbuild Dual Purpose Foam Cleaner – 500ml (Box of 12) 
How to Use Heat Resistant Paint in Matt Black
Firstly, stir the paint well before use. Allow the stove to cool before application and switch off pilot lights if applicable. Test on a previously painted surface for compatibility checks. After testing, apply with a bristle paintbrush. It should take 15 minutes to dry, but we recommend handling it only after 60 minutes of dry time. The paint surface if air dried will become fully cured after the painted article has been heated up for the first time. Care must be taken with the paint film until this has occurred. Alternatively, the paint may be stoved to fully cure (stoving; 20 minutes at 200-220°C).
