FloPlast Half Round External Stop End, Brown – 112mm 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
FloPlast Half Round Square Line Gutter Adaptor - White 
ALM Code 5 Milled Lead - 510mm x 3m 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Everbuild Clear Fix – 290ml (Box of 12) 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Timco Air Wedge 
Bond It Felt Adhesive - Black 1L 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Code 5 Cast Lead - 510mm x 3m 
Gorilla Contact Adhesive Tube - Clear 75g 
OX Tools Trade Bucket, Black - 15 Litre 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Spax T-Star Plus Washer-Head Wirox Coated Screws - 6.0 x 200mm (Box of 16) 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Bostik Builder Tape, 50mm - 25m 
Bond It Bitumen Primer - Black 5L 
OX Pro Aluminium Metric Rafters Square - 180mm 
Klober Double Roman Roof Tile Vent - Terracotta KG9857-3-0152 (Box of 10) 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
Standard Brush 2-Inch 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Ronseal Fence Life Brush - 4" 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Soudafoam Gap Filler Gun Grade – 750ml 
Soudal Silicone Sealant Remover, Clear - 100ml 
Uses
The JETCEM Rapid by Everbuild is the ultimate quick repair product for concrete-based surfaces. Everbuild's technicians have formulated the JETCEM with a superb, fast-setting product, enabling swift application and easy repair. Applications where the JETCEM is perfect include;
- Internal and external repairs to gaps and cracks on floors and walls
- Repairing flagstones, slabs, stones and bricks
- Patching window sills and steps
- Jointing earthenware drains and pipes
- Repairing ponds and pools
- Setting in W/C's and sinks
- Leak sealing in concrete-based surfaces
- Setting posts and railing
Preparation
Before commencing the application, it's essential to prepare the surface. Complete this by removing any contaminants on the surface that can hinder the adhesion, including dirt, dust, oil, grease, etc.
Application
- Using a clean vessel, mix 3 parts volume powder to 1 part cold, clean water. You should only mix enough for up to 10 minutes of work, as after 10 minutes, the mixture becomes invalid for use. To know you've mixed it correctly, you should finish with a reasonably thick slump-free paste.
- Saturate the surface entirely using water.
- Using a trowel or filling knife, scoop the mixture into the application area.
- In warm conditions, you can cover the JETCEM with polyethene to assist in the curing process.
Limitations
- When mixing, it's important to mix only enough for up to 10 minutes. After 10 minutes, it will stiffen and become invalid; you cannot add water to it to try and soften it; this will weaken the cement.
- This product should not be used for load-bearing applications.
- Do not use this for holes deeper than 25mm.
- Do not apply where chemical resistance is required.
