ALM Code 3 Milled Lead - 600mm x 6m 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
OX Tools Pro Chalk Line Reel 30m / 100ft 
ALM Code 8 Milled Lead - 800mm x 6m 
Everbuild Febond PVA - 5L 
Bond It Cove-Mate Coving Adhesive - White EU3 
Bond It A43 Threadlock Oil Tolerant Adhesive - 50ml Blue 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
ALM Code 4 Milled Lead - 510mm x 3m 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
Ronseal Precision Finish Brush - 1.5 Inch 
Sika Stone Protector - Clear 5 Litre 
Everbuild Stixall Extreme Power – Black 290ml 
Soudal 5 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Code 6 Cast Lead - 1200mm x 3m 
Everbuild Maximum Torque - White 290ml 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Freund Mastercut Natural Slate & Man Made Slate Cutter with Hole Punch 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
