Everbuild Quick Drying Clear Varnish - Satin 250ml 
Ronseal Ultimate Finish Decking Pad Kit 
Everbuild Everflex Mirror Mate Adhesive - White 290ml (Box of 12) 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit (Pallet of 84 Boxes) 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
OX Pro Grout Remover 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Ronseal Precision Finish Brush - 2 Inch 
Bond It Rubber Bitumen Emulsion - Black 25L 
Timco Mixed Plasterboard Fixings 
Soudal Pro 40P PU Wood Adhesive - 750g 
Bond It Monster Scrim Drywall Tape - White 100mm x 90m 
Everbuild Fill & Skim - 5 Litre 
Code 6 Cast Lead - 300mm x 6m 
Soudal Genius Gun Gap Filling Foam - 750ml 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Everbuild No Waste Foam – 750ml 
ALM Code 6 Milled Lead Flashing - 850mm x 3m 
Everbuild 506 Universal Contractors PVA - 5Kg White 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
FloPlast Half Round Running Outlet, Black 
Bond It Pro-Mate LMA Silicone - White EU3 
Everbuild 503 SBR Bond – 5 Litre 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
