Bostik Penetration Primer For Roofs, Black - 5 Litre 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 125mm 
Ronseal 3 in 1 Basecoat - White 5L 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Soudal Soudafoam Window & Door Gun Grade – 750ml (Box of 12) 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Code 7 Cast Lead - 1000mm x 3m 
Spax Phillips Ph3 Drill Bits - 25mm (Pack of 5) 
ALM Code 8 Milled Lead - 180mm x 3m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Armatool Lead Dresser Set - 5 Piece Set 
Code 3 Cast Lead - 450mm x 3m 
ALM Code 5 Milled Lead - 1600mm x 3m 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
Siroflex Trade Hand Held PU Expanding Foam 
Lead Hall Fixing Clips - Pack of 50 
Timloc Castellated Tile Vent Red (Box of 8) 
Bond It Decking Cleaner - Clear 5L 
Soudal Genius Gun Gap Filling Foam - 750ml 
FloPlast Ogee Fascia Bracket, Black 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Thompson's Water Seal - 1L 
Everbuild Pinkgrip SF Solvent Free Adhesive – 380ml (Box of 12) 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
