FloPlast Square Gutter 90° Bend - White 
Code 7 Cast Lead - 1600mm x 6m 
Easy Prime Porcelain Prime Slurry - 15kg 
Ronseal Quick Drying Stain Block - Aerosol White 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Ulti-Mate Plain Tile Vent Adaptor 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre 
Cromar Vent 3 Air High Performance Breathable Membrane 1m x 50m 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
OX Polyzip™ Flex C1 Cutter - 15mm to 28mm 
Permavent Plain Easy - Box of 20 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
Everbuild Mammoth Clear Weatherproof Tape 
Isoflex Special Primer - 750ml 
ALM Code 3 Milled Lead - 1600mm x 6m 
ALM Code 6 Milled Lead Flashing - 180mm x 6m 
ALM Code 4 Milled Lead - 1000mm x 3m 
Ronseal Precision Finish Brush - 0.5 Inch 
OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
Bond It Incredibond Solvent Free Adhesive - White 310ml 
Everbuild Resiblock Block Paving Sealer - Matt 5 Litre 
Everbuild Filler Coat – White 5 Litre 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
