Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Hambleside Danelaw Double Pantile Vent TV15/2 - Slate Grey (Box of 5) 
Siroflex SX Contractors LMN Silicone OAK 300ml 
ALM Code 3 Milled Lead - 390mm x 6m 
OX Pro Harling Trowel - 165mm X 165mm 
ALM Code 8 Milled Lead - 510mm x 6m 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
Bond It Dustproof & Hardener - Clear 5L 
Soudal Roof & Gutter Sealant – Black 290ml 
Armatool Batten Gauge - Up to 14" 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Armatool High Visibility Marking chalk (200g) 
Everbuild Filler Coat – White 5 Litre 
Ronseal Trade 10Yr Woodstain Satin Walnut 2.5ltr Brown 
Everbuild Forever White Silicone Sealant – 295ml 
Ronseal Super Flexible Smooth Finish Filler - 330g 
Everbuild Clear Fix – 290ml 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Code 7 Cast Lead - 240mm x 6m 
FloPlast Square Line Internal Stop End White – 114mm 
Soudal Pro 45P Superfast Wood Glue - 750g 
ALM Code 4 Milled Lead - 300mm x 3m 
Freeflow Round 112mm Gutter System 135° - Black 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Bond It AS900 Acoustic Sealant - White 900ml 
Uses
Overlap & Border Adhesive by Everbuild can adhere all common papers to each other and to gloss and emulsion paints. It contains a powerful fungicide, which prevents any chance of mould growing underneath the paper. One of this product's unique features is its ability to reposition it without damaging the adhesive.
Preparation
Before starting the application, prepare the surface by removing any contaminants that can hinder the adhesion, including dirt, dust or loose flaking materials. Gloss or non-porous surfaces need to be rubbed down to improve adhesion.
Application
For borders:
Cut the border to the required length, and gently score the vinyl wallpaper where the border is to be positioned. If the application is on pre-paste borders, moisten before applying adhesive. Spread the adhesive over the border, ensuring even coverage, and use a sponge or cloth to smooth it down. Avoid contact with the printed side of the wallpaper; if contact occurs, use a damp cloth to remove it.
For overlap repairs:
Apply the adhesive to the fixed substrate, press the overlap piece into position, pressing firmly into place using a brush, and wipe any excess glue with a damp cloth.
Limitations
- Use as directed, this product won't work if not used properly
- Keep it stored in its original container
