Bond It Saves Nails Solvent-Free - White EU3 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
FloPlast Half Round Gutter 135° - Black 
Samac Copper Wire Coil 36m x 2mm 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
Code 5 Cast Lead - 1600mm x 6m 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Everbuild 503 SBR Bond – 2.5 Litre 
FloPlast Half Round External Stop End, White – 112mm 
ALM Code 8 Milled Lead - 390mm x 3m 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
ALM Code 3 Milled Lead - 210mm x 3m 
Timco Lithium EP2 Grease - 400g 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Ronseal Precision Finish Brush - 3 Pack 
Oxyturbo Maxy Gas Refill 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Code 6 Cast Lead - 300mm x 6m 
ALM Code 5 Milled Lead - 180mm x 3m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Left Hand Klober Contract Dry Verge Unit Grey 
Code 8 Cast Lead - 1600mm x 3m 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Uses
The Pro-Fill by Everbuild is an excellent, high-performance 2-part filler that provides outstanding filling properties with a composite that, once cured, is resistant to oil, water and impacts. This multi-purpose filler consists of a grey-coloured polyester paste mixed with a Benzoyl Peroxide hardener, creating an almost unbreakable bond. It forms a solid hard mass that offers excellent resistance to abrasion and overall durability. Applications this product is typically applied in include;
- Repairing cracks in wood, metal, GRP and concrete
- Filling holes in damaged timber or metal shuttering
- Used for joinery, decorating and building applications
Preparation
All surfaces to be filled should be prepared before application. Start by cleaning the substrate, ensuring it's sound and free from contaminants, including dirt, dust, sawdust, grease, oil, etc. You should dampen the surface with a solvent system.
Application
- Before filling, thoroughly mix the Fill Paste (Golf Ball-Sized amount) with the Everbuild wood hardener (Pea-Sized amount).
- Ensure that it's mixed, scraping it clear from the mixing board.
- Create the desired shape and place it directly to the gap, leaving it proud of the surface and subsequently allowing sanding to occur.
Limitations and Notes
- Do not use this product on bitumen or asphalt surfaces.
- This product should not be applied to surfaces that bleed oils or plasticisers.
- Do not apply when the surface or ambient temperature is below 5°C.
- This product should not be used in areas that experience excessive movement.
- Note you should mix 100 parts paste to 2 parts hardener w/w.
