FloPlast Round 92½° Bend - Black 
Samac Copper Wire Coil 36m x 2mm 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm (Pallet of 24) 
SikaGard Wood Preserver - Clear 5 Litre 
ALM Code 4 Milled Lead - 850mm x 3m 
Ronseal 3 in 1 Basecoat - White 5L 
Code 8 Cast Lead - 510mm x 3m 
Everbuild Triple Action Wood Treatment – 5 Litre 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
OX Trade XL Cuts All Tiles Diamond Blade 
Sika MaxMix Waterproofer - 1 Litre 
Bond It Contractors PVA - 2.5L White 
Thompson's Patio & Block Paving Seal - Natural 5L 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 50g 
Everbuild 503 SBR Bond – 2.5 Litre 
Klober Profile-Line Adaptor & Flexipipe - KG979100 / KG979900 
ALM Code 3 Milled Lead - 760mm x 6m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Uses
The Salt-Away by Everbuild is a unique, high-quality formula that combats unsightly marks left when salt evaporates from surfaces, leaving white marks and efflorescence. It's formulated using a special, non-hydrochloric acid, which is safer to handle and for organic life.
Issues that can occur if you leave this untreated can lead to corrosive damage and structural damage to some surfaces.
Preparation
Use a stiff brush to wipe the surface, removing any surface dirt or debris.
Application
- Dampen the surface you intend to apply this to
- Apply the Salt-Away to the surface, ensuring that you apply thorough, even coverage.
- Allow it to sit on the surface for 5-10 minutes, depending on levels of efflorescence.
- Wash the surface down thoroughly using clean water
- If the efflorescence is still present, repeat the application
Limitations
- Always test in a small, inconspicuous area to ensure surface compatibility.
- Do not use on artificially coloured stone, pavers or blocks.
- Any accidents, spillages or oversprays must be washed off immediately using clean water.
